HENRY 650 R Pressure Sensitive Adhesive is a premium pressure sensitive adhesive with releasable or permanent bonding properties that firmly adhere the floor.
- Releasable or permanent installations
- Moisture resistant up to 90% RH
- Easy application
- Plasticizer migration resistant
- Solvent free
- Solid vinyl tile (LVT) and solid vinyl plank (LVP) - residential installations only
Releasable Bond Installation:
HENRY 650 R Releasable Bond Pressure Sensitive Adhesive is formulated with releasable bonding properties that firmly adhere throughout the service life of the floor, yet the flooring can be easily removed at any time without causing damage to the subfloor. The releasable properties and its easy roll-on application makes HENRY 650R the ideal adhesive for reducing the remodel workload in rental units, condominiums or other spaces that undergo frequent replacement of floor coverings.
Use for fiberglass-reinforced sheet vinyl flooring, solid vinyl tile (LVT), solid vinyl plank (LVP), vinyl-backed sheet flooring and vinyl-backed carpet tile.
Refer to flooring manufacturers specific recommendations for suitable substrates.
Concrete cementitious underlayments, suspended APA grade underlayment plywood and radiant heated subfloors where temperatures do not exceed 85°F (29°C). For use on all grade levels. Can also be used over properly primed gypsum underlayments (above grade only).
Terrazzo and fully adhered, non-cushion backed resilient on all grade levels.
Short Nap Roller (3/16" or 3/8")
Apply evenly at a rate not to exceed 1200 sq. ft./4-gallon
Fiberglass-Reinforced Sheet Vinyl; Solid Vinyl Tile (LVT) Installed Over Non-Porous Substrates; Solid Vinyl Plank (LVP) Installed Over Non-Porous Substrates; Vinyl-Backed Sheet Flooring Installed over Non-Porous Substrates
U-Notch 1/32" D x 1/16" W x 1/32" A
Trowel apply then immediately back-roll with an adhesive saturated short nap paint roller. Trowel notch yields approx. 1200 sq. ft./4-gallon.
Solid Vinyl Tile (LVT) Installed Over Porous Substrates; Solid Vinyl Plank (LVP) Installed Over Porous Substrates; Vinyl-Backed Sheet Flooring Installed over Porous Substrates; Vinyl-Backed Carpet Tile
Sq-Notch 1/16" D x 1/16" W x 1/16" A
Trowel notch yields approx. 500 - 600 sq. ft./4-gallon.
Carefully read and follow all cautions and warnings on the product label. Refer to the Material Safety Data Sheet for additional product information.
Tech Support: 800.232.4832