fbpx

PANDOMO® Decorative Concrete

Products

ARDEX PANDOMO® ES

Clear Waterborne Epoxy Floor Primer

  • Use as a system with ARDEX PANDOMO® PS Urethane Protective Wear Layer to seal and protect ARDEX PANDOMO® Floor, FloorPlus and Loft
  • Two-part, waterborne epoxy primer for ARDEX PANDOMO PS
  • Apply top coat of ARDEX PANDOMO PS in as little as 4 hours
ARDEX PANDOMO ES
Images and Videos
  • ARDEX PANDOMO ES

Information ARDEX PANDOMO® ES

ARDEX PANDOMO® ES is a waterborne, two-part epoxy floor primer for interior use over ARDEX PANDOMO Floor, FloorPlus and Loft. Designed to penetrate porous surfaces, ARDEX PANDOMO ES serves as a fast-drying base coat for the subsequent installation of two coats of ARDEX PANDOMO PS Clear Waterborne Two-Part Urethane Protective Wear Layer.

The installation of all PANDOMO products is limited to PANDOMO Elite Installers. Find your PANDOMO Elite Installer here.

Key Features

  • Use as a system with ARDEX PANDOMO® PS Urethane Protective Wear Layer to seal and protect ARDEX PANDOMO® Floor, FloorPlus and Loft
  • Two-part, waterborne epoxy primer for ARDEX PANDOMO PS
  • Apply top coat of ARDEX PANDOMO PS in as little as 4 hours
  • For interior use only

 

Technical Data ARDEX PANDOMO® ES

Installation

Coverage: 250 to 300 square feet (23 to 28 sq. m) per unit. Coverage may vary based on surface texture.
Recommend Film Thickness: 5 to 7 mils wet, which yields 2 to 3.5 mils dry (127 to 178 microns wet, which yields 50 to 90 microns dry)

Performance

Pot Life: 2 hours
Drying Time (minimum at 70°F/21°C):
To touch: 2 to 4 hours
To recoat: 4 to 6 hours
Light foot traffic: 6 to 12 hours
Full cure (heavy traffic): 2 to 5 days
VOC Content: <50 145 g/L
Solids Content: 43% (+/- 2%) by weight
Finish: 30 to 50 at 60°F (15°C)
Abrasion Resistance: Taber Abrasor CS-17 Calibrase wheel with 1000 gram total load and 500 cycles = 45 mg loss
Adhesion: >425 psi (concrete failure, no delamination)
Packaging: One gallon unit in two components (Part A: 0.80 gal; Part B: 0.20 gal)
Storage: Store in a cool dry area. Do not leave container exposed to sun. Keep from heat. Protect from freezing. Keep container closed when not in use.
Shelf Life: One year unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Contact Us

Questions? Please fill out the form below to contact us with any of your questions or concerns. We look forward to hearing from you, and we’ll be in touch shortly.

Information ARDEX PANDOMO® ES

ARDEX PANDOMO® ES is a waterborne, two-part epoxy floor primer for interior use over ARDEX PANDOMO Floor, FloorPlus and Loft. Designed to penetrate porous surfaces, ARDEX PANDOMO ES serves as a fast-drying base coat for the subsequent installation of two coats of ARDEX PANDOMO PS Clear Waterborne Two-Part Urethane Protective Wear Layer.

The installation of all PANDOMO products is limited to PANDOMO Elite Installers. Find your PANDOMO Elite Installer here.

Key Features

  • Use as a system with ARDEX PANDOMO® PS Urethane Protective Wear Layer to seal and protect ARDEX PANDOMO® Floor, FloorPlus and Loft
  • Two-part, waterborne epoxy primer for ARDEX PANDOMO PS
  • Apply top coat of ARDEX PANDOMO PS in as little as 4 hours
  • For interior use only

 

Technical Data ARDEX PANDOMO® ES

Installation

Coverage: 250 to 300 square feet (23 to 28 sq. m) per unit. Coverage may vary based on surface texture.
Recommend Film Thickness: 5 to 7 mils wet, which yields 2 to 3.5 mils dry (127 to 178 microns wet, which yields 50 to 90 microns dry)

Performance

Pot Life: 2 hours
Drying Time (minimum at 70°F/21°C):
To touch: 2 to 4 hours
To recoat: 4 to 6 hours
Light foot traffic: 6 to 12 hours
Full cure (heavy traffic): 2 to 5 days
VOC Content: <50 145 g/L
Solids Content: 43% (+/- 2%) by weight
Finish: 30 to 50 at 60°F (15°C)
Abrasion Resistance: Taber Abrasor CS-17 Calibrase wheel with 1000 gram total load and 500 cycles = 45 mg loss
Adhesion: >425 psi (concrete failure, no delamination)
Packaging: One gallon unit in two components (Part A: 0.80 gal; Part B: 0.20 gal)
Storage: Store in a cool dry area. Do not leave container exposed to sun. Keep from heat. Protect from freezing. Keep container closed when not in use.
Shelf Life: One year unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Contact Us

  • This field is for validation purposes and should be left unchanged.