fbpx

Moisture Control

Products

ARDEX PU 50™

One-Component, Polyurethane, Vapor Retarder

  • Reduces moisture vapor emissions in concrete to acceptable levels
  • No minimum profile required
ARDEX PU 50
Images and Videos
  • ARDEX PU 50

Information ARDEX PU 50™

ARDEX PU 50 is a ready-to-use, one-component, polyurethane resin system formulated to suppress residual moisture up to 98% in most concrete slabs.  ARDEX PU 50 comes in a ready-to-use, resealable container.

Key Features

  • Reduces moisture vapor emissions in concrete to acceptable levels
  • No minimum profile required
  • Zero VOC, solvent free
  • Fast drying – re-coat in as little as 60 minutes
  • One-component system
  • Ready for use, resealable and reusable
  • Easy to use and apply

Standards

SystemOne

Technical Data ARDEX PU 50™

Installation

Coverage: Approx. 500 sq. ft. (46.5 sq. m) per unit at 2 coats of 4 mils (100 microns) each
Approx. 200 sq. ft. (18.5 sq. m) per gallon at 2 coats of 4 mils (100 microns) each
Approx. 4.9 sq. m per liter at 2 coats of 4 mils (100 microns) each
(Will vary with concrete surface profile, porosity and texture)

Performance

Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install ARDEX Underlayment: 1 – 24 hours (after the application of the second coat)
Install Floating/Non-Adhered Floor Covering: 1 – 24 hours (after the application of the second coat)
VOC: 0 g/L
Packaging: 2.5-gallon (9.5 L) jug
Storage: Store at temperatures between 40 and 90˚F (5 – 32˚C). Do not allow to freeze.
Shelf Life: 1 year, if unopened. Open containers remain usable for 3 months if properly resealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies. Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Information ARDEX PU 50™

ARDEX PU 50 is a ready-to-use, one-component, polyurethane resin system formulated to suppress residual moisture up to 98% in most concrete slabs.  ARDEX PU 50 comes in a ready-to-use, resealable container.

Key Features

  • Reduces moisture vapor emissions in concrete to acceptable levels
  • No minimum profile required
  • Zero VOC, solvent free
  • Fast drying – re-coat in as little as 60 minutes
  • One-component system
  • Ready for use, resealable and reusable
  • Easy to use and apply

Standards

SystemOne

Technical Data ARDEX PU 50™

Installation

Coverage: Approx. 500 sq. ft. (46.5 sq. m) per unit at 2 coats of 4 mils (100 microns) each
Approx. 200 sq. ft. (18.5 sq. m) per gallon at 2 coats of 4 mils (100 microns) each
Approx. 4.9 sq. m per liter at 2 coats of 4 mils (100 microns) each
(Will vary with concrete surface profile, porosity and texture)

Performance

Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install ARDEX Underlayment: 1 – 24 hours (after the application of the second coat)
Install Floating/Non-Adhered Floor Covering: 1 – 24 hours (after the application of the second coat)
VOC: 0 g/L
Packaging: 2.5-gallon (9.5 L) jug
Storage: Store at temperatures between 40 and 90˚F (5 – 32˚C). Do not allow to freeze.
Shelf Life: 1 year, if unopened. Open containers remain usable for 3 months if properly resealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies. Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

For complete product technical information, click on the Downloads tab and open the Technical Data download.