Information ARDEX VR 98™
ARDEX VR 98™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress residual moisture in concrete with RH readings up to 98%.
- Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
- For RH readings up to 98%
- For absorbent concrete
- No minimum profile required
- No priming required
Fast drying – install ARDEX underlayments in as little as 2 hours after applying the second coat
- One-component system
- Ready for use*, resealable and reusable
- Easy to use and apply
*Thoroughly mix ARDEX VR 98 with a low speed drill and paint mixing paddle until the material is evenly distributed throughout the container.
- Technical Data
Technical Data ARDEX VR 98™
Coverage: Approx. 425 sq. ft. (10.4 sq. m) per unit at 2 coats of 8 mils each
Approx. 100 sq. ft. per gal. (2.45 sq. m per L) at 2 coats of 8 mils each
(Will vary with concrete surface profile, porosity and texture)
Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 2 hours); no max. provided surface is protected
Install Underlayment: 2 – 24 hours
VOC: 37.5 g/L
Packaging: One 4.25 gal. (16 L) pail
Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.
For complete product technical information, click on the Downloads tab and open the Technical Data download
- BIM Objects
BIM Objects ARDEX VR 98™