Products
ARDEX
Products
- With a tradition of uncompromising quality, ARDEX offers Engineered Cements™ providing high-performance, innovative, fast-track solutions designed with the installer in mind.
Products
You need solutions that deliver consistent results for every type of install. ARDEX is committed to matching the right products with your next installation to minimize time, cost and risk at every job site. With the unparalleled support of technical and field experts, we provide on-site product know-how and job site consultation expertise to architects, building engineers, construction managers, general and specialist contractors as well as professional flooring installers. With ARDEX complete system solutions, you can rest easy knowing the job is done right the first time, every time!
-
ARDEX FEATHER FINISH®
Self-Drying Cement-Based Finish Underlayment
- Provides a smooth surface prior to the installation of floor covering over a variety of substrates
- Install floor coverings in as little as 15 minutes
-
ARDEX MRF™
Moisture Resistant, Rapid-Drying, Skimcoat Patching Underlayment
- Engineered to withstand 100% RH; unlimited moisture and water
- ARDEX WeatherProof Technology
-
ARDEX SD-P®
Self-Drying, Trowelable Concrete Underlayment
- Ideal for ramping, patching large areas and screeding
- Ready for floor covering in as little as 90 minutes
-
-
ARDEX K 60™ ARDITEX
Rapid Setting Latex Smoothing and Leveling Compound
- NEW PACKAGING OPTION!
- No water required for mixing; simply mix with latex additive
-
ARDEX K 13™
Premium Self-Leveling Underlayment
- Use over interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete
- Dual water ratio allowing high flow or standard flow installations
-
ARDEX V 1200™
Self-Leveling Underlayment
- Use over interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete
- Excellent flow and heal properties
-
-
ARDEX EP 2000™
Substrate Preparation Epoxy
- Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
- Required primer for decorative applications of ARDEX self-leveling toppings
-
ARDEX P 51™
Primer
- For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
- Seals the substrate
-
ARDEX ARDIFIX™
Low Viscosity Rigid Polyurethane Crack and Joint Repair
- Extremely low viscosity allows for deep penetration
- Use interior or exterior
-
-
ARDEX DUSTFREE™
Dust-Reducing Unit for ARDEX T-10 Black Mixing Barrels
- Promotes cleaner, greener job site for improved working conditions
- Reduces airborne dust from mixing with drill
-
ARDEX Tool Kit
For the Installation of ARDEX Self-Leveling Cements
- For the Installation of ARDEX Self-Leveling Cements
- Includes: T-1 Mixing paddle, T-4 Spreader, T-5 Smoother, T-10 Mixing barrel with lid
-
ARDEX ARDIPEG™
Self-Leveling Pins
- For mapping elevation requirements
- Pins become invisible part of the matrix
-
-
ARDEX VB 100™
Fast-Track, One-Component Moisture Vapor Barrier
- Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
- For RH readings up to 100%
-
ARDEX MC™ RAPID
One-Coat Moisture Control System for Concrete to Receive ARDEX Products
- One-coat epoxy resin system
- Ready to prime in just 4 hours
-
-
ARDEX X 5™
Flexible and Versatile Tile and Stone Mortar
- Ideal for large format and heavy tile and stone applications up to 3/4" sq. notch trowel
- Excellent sag resistance
-
ARDEX X 77™ MICROTEC®
Fiber Reinforced Tile and Stone Mortar
- True 60-minute open time, unmatched sag resistance - Both double the ISO standard!
- Ideal for high traffic areas and exterior facades
-
ARDEX S 28™ MICROTEC®
Rapid-Set, Rapid-Dry, Super-Format Tile and Uncoupling Membrane Mortar
- ARDEX Proprietary Self Drying Technology; Rapid Drying, Rapid Hardening and NO Shrinkage!
- Walk on and grout in just 4 hours
-
-
ARDEX FL™
Rapid Set, Flexible, Sanded Grout
- Open to traffic in just 90 minutes
- Much fuller, stronger grout joints
-
ARDEX WA™
High Performance, 100% Solids Epoxy Grout and Adhesive
- Grout joints up to 1/2" (12 mm)
- Cleans with only water!
-
ARDEX FG-C™
MICROTEC® Unsanded Grout
- Open to traffic in just 4 hours
- For grout joints up to 1/4" (6 mm)
-
-
ARDEX AM 100™
Pre-Tile Ramping and Smoothing Mortar
- Install tile in just 2 hours
- No sag or slump
-
ARDEX Liquid BackerBoard®
Self-Leveling Underlayment for Interior Wood and Concrete Subfloors
- No metal lath mesh or additives required
- Walk on: 3 hours, Tile installation: 6 hours
-
ARDEX TL 1000™
Self-Leveling Underlayment
- Walk on in 4-5 hours
- Tile installation: 6 hours (most other floor coverings after 24 hours)
-
-
ARDEX 8+9™
Rapid Waterproofing and Crack Isolation Compound
- Install tile in just 90 minutes and flood test in 4 hours
- Crack isolation up to 1/8" (3 mm)
-
ARDEX S 1-K™
One-Component Waterproofing and Crack Isolation Membrane
- Flexible, topside waterproofing for interior floors and walls
- Crack isolation up to 1/8" (3 mm)
-
ARDEX TLT™ Waterproofing Membrane
Waterproofing Membrane and Vapor Retarder for Tile & Stone Installations
- For topside waterproofing over floors and walls
- Perm rating acceptable for residential and commercial steam shower use
-
-
ARDEX PC 10™
Lithium Hardener for PC-T™ Polished Concrete Topping
- For use in the grinding and polishing of ARDEX Polished Concrete Systems
- Creates an extremely dense, durable hard surface that resists dusting and wear
-
ARDEX PC FINISH™
Stain & Wear Protection - High and Low Gloss
- High and Low gloss
- Increases abrasion and stain resistance
-
-
ARDEX EP 2000™
Substrate Preparation Epoxy
- Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
- Required primer for decorative applications of ARDEX self-leveling toppings
-
ARDEX MC™ RAPID
One-Coat Moisture Control System for Concrete to Receive ARDEX Products
- One-coat epoxy resin system
- Ready to prime in just 4 hours
-
ARDEX ARDIFIX™
Low Viscosity Rigid Polyurethane Crack and Joint Repair
- Extremely low viscosity allows for deep penetration
- Use interior or exterior
-
ARDEX ARDISEAL™ RAPID PLUS
Semi-Rigid Joint Sealant
- Designed specifically for filling cracks, control joints (saw cuts) and expansion joints that will be directly exposed to traffic
- Abrasion resistant
-
-
ARDEX CD™
Concrete Dressing
- Resurface worn and spalled concrete to provide a “new concrete” finish
- Suitable for foot and rubber tire traffic on commercial and residential applications
-
ARDEX CD FINE™
Concrete Dressing
- Resurface worn and spalled concrete to provide a “new concrete” finish
- Suitable for foot and rubber tire traffic on commercial and residential applications
-
ARDEX K 301™
Exterior Self-Leveling Concrete Topping
- Smooth new or existing concrete and approved non-porous surfaces
- Suitable for use in wet areas
-
-
ARDEX ARDIFIX™
Low Viscosity Rigid Polyurethane Crack and Joint Repair
- Extremely low viscosity allows for deep penetration
- Use interior or exterior
-
ARDEX CG Concrete Guard™
High-performance, high solids, waterborne, acrylic concrete sealer
- Seals and protects all uncoated cementitious surfaces, including ARDEX Toppings
- Durable and abrasion-resistant on interior and exterior absorbent concrete and masonry surfaces
-
-
POWERFLO®
High-Capacity Pump Trailer
-
ARDEX ARDIFLO® Small Pump Systems
High Output Model
- Self-contained, all-in-one unit for mixing and pumping pre-blended, cementitious materials
- Utilizes continuous, in-line mixing and rotor stator pumping
-
ARDEX ARDIFLO® Mid-Capacity Pump
- Pumping distance 400 feet total with 150 feet vertical capacity
- Customer training offered
-
-
ARDEX HC 100™
High-Capacity Self-Leveling Underlayment
- Self-contained, all-in-one unit for mixing and pumping pre-blended, cementitious materials
- Utilizes continuous, in-line mixing and rotor stator pumping
-
ARDEX HC 100R™
High-Capacity Rapid Self-Leveling Underlayment
- Self-contained, all-in-one unit for mixing and pumping pre-blended, cementitious materials
- Utilizes continuous, in-line mixing and rotor stator pumping
-
ARDEX P 51™
Primer
- For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
- Seals the substrate
-