Tile & Stone Installation Systems
ALL PRODUCTS
Tile & Stone Installation Systems
- The most complete, single-source tile and stone installation systems backed by the most comprehensive system warranty in the industry
Tile & Stone Installation Systems
ARDEX is recognized worldwide for delivering the most complete, single source tile and stone installation systems with the highest level of performance and innovation. Designed with the installer in mind, ARDEX provides complete system solutions from substrate prep up through the grout for virtually any installation project.
Product categories include adhesives and mortars, caulks and sealants, grouting systems, screeds/mudbeds, substrate preparation, uncoupling and heating systems, and waterproofing systems – all backed by the industry best single source SystemOne™ warranty!
-
ARDEX X 3™ PLUS
LHT - Large and Heavy Tile and Stone Mortar
- Formulated for large and heavy tile and stone and ungauged thicknesses
- Non-sag and minimizes slump – for use on walls and floors
-
ARDEX X 5™
Flexible and Versatile Tile and Stone Mortar
- Ideal for large format and heavy tile and stone applications up to 3/4" sq. notch trowel
- Excellent sag resistance
-
ARDEX X 77™ MICROTEC®
Fiber Reinforced Tile and Stone Mortar
- True 60-minute open time, unmatched sag resistance - Both double the ISO standard!
- Ideal for high traffic areas and exterior facades
-
ARDEX S 28™ MICROTEC®
Rapid-Set, Rapid-Dry, Super-Format Tile and Uncoupling Membrane Mortar
- ARDEX Proprietary Self Drying Technology; Rapid Drying, Rapid Hardening and NO Shrinkage!
- Walk on and grout in just 4 hours
-
ARDEX X 90 OUTDOOR™
MicroteC3 Rapid-Set, Flexible Tile and Stone Mortar
- Highest levels of freeze thaw resistance - Tested at 150+ freeze thaw cycles (7x greater than the ANSI 118.15 standard requirement of 20 cycles)
- Maximum efflorescence resistance
-
ARDEX X 32™ MICROTEC®
Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar
- Thin-to-thick bed applications up to 1 1/4" (32 mm)
- Fast setting; grout in 3 hours
-
ARDEX X 78™ MICROTEC®
Semi-Pourable Tile and Stone Mortar
- Open time: 60 minutes
- Excellent flexibility and strength
-
ARDEX N 23™ MICROTEC®
Rapid Set Natural Stone and Tile Mortar
- Thin-to-medium bed applications up to 5/8"
- Rapid setting; grout in only 2 hours
-
ARDEX X 4™
LFT - Large Format Tile and Stone Mortar
- Ideal for large format tile and stone
- Use above and below uncoupling membranes
-
ARDEX X 3™
Tile and Stone Mortar
- Interior and exterior use
- Working time: 15 to 20 minutes
-
ARDEX S 48™
Rapid-Set Mortar / Mastic Hybrid
- Time to grout: Walls: 1 to 3 hours, Floors: 5 hours
- Excellent for quick tile repairs and fixes
-
ARDEX X 7 R™
Rapid Set, Flexible Tile and Stone Mortar
- Rapid setting; walk on or grout in just 3 hours
- Very good sag resistance
-
ARDEX X 7 PLUS™
High Yield Mortar
- High yield, 105 sq. ft. (9.7 sq. m), 1/4"x1/4" sq. notch trowel
- Excellent non-sag properties
-
ARDEX FB 9 L™
Pourable ShearFlex® Mortar
- Grout in just 6 hours
- Excellent shear strength and flexibility
-
ARDEX D 14™
Type 1 Premixed Tile Adhesive (Mastic)
- Floors up to 6"x 6" tiles, walls up to 12"x 12" tiles
- Time to grout: Walls: 24 hours; Floors: 48 hours
-
ARDEX E 90™ Mortar Admix
Tile and Stone Mortar Enhancer
- Improves adhesion and flexibility when setting all tile types
- Provides a water-repellant mortar for tilling showers, swimming pools and other wet areas; helps reduce the risk of efflorescence
-
ARDEX CA 20 P™
Multipurpose Construction Adhesive and Sealant
- Interior and exterior use
- Curing time: 24 hours
-
ARDEX SX™
100% Silicone Sealant for Tile and Stone Applications
- Interior and exterior use
- No sag or slump
-
ARDEX FLEX CAULK™
Siliconized Acrylic Color Caulk
- Stain, mold and mildew resistant
- Very flexible
-
ARDEX FL™
Rapid Set, Flexible, Sanded Grout
- Open to traffic in just 90 minutes
- Much fuller, stronger grout joints
-
ARDEX WA™
High Performance, 100% Solids Epoxy Grout and Adhesive
- Grout joints up to 1/2" (12 mm)
- Cleans with only water!
-
ARDEX FG-C™
MICROTEC® Unsanded Grout
- Open to traffic in just 4 hours
- For grout joints up to 1/4" (6 mm)
-
ARDEX FH™
Sanded Floor and Wall Grout
- Open to traffic 16 to 24 hours
- For grout joints 1/16" to 3/4" (1.5 mm to 19 mm)
-
ARDEX GCS™
Grout Colorant and Sealer
- Use to refresh, repair or change grout color
- Excellent stain resistance
-
ARDEX A 38™
Rapid Set Screed
- Rapid hardening; walk-able in 3 hours
- Install tile or stone after only 4 hours
-
ARDEX A 38™ MIX
Rapid Set, Premixed Screed
- Rapid hardening; walkable in 3 hours
- Install tile or stone after only 4 hours
-
ARDEX E 100™
Screed Improvement and Bonding Slurry Additive
- Improves elasticity, compressive and tensile strengths
- Improves workability and plastic properties without increasing water content
-
ARDEX P 4™
Pre-Mixed, Rapid-Drying, Multipurpose Primer
- For use prior to the installation of ARDEX Tile & Stone Installation Systems and most ARDEX Self-Leveling Underlayments
- Ideal for Tile over Tile installation
-
ARDEX P 51™
Primer
- For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
- Seals the substrate
-
ARDEX P 82™
Ultra Prime
- For the installation of ARDEX underlayments over non-porous, wood and metal substrates and adhesive residue on concrete
- Waterborne, two-component primer
-
ARDEX TL 1400™
Self-Leveling Underlayment
- For smoothing substrates prior to tiling over interior concrete, terrazzo, tile, epoxy coatings and non-water-soluble adhesive residue over concrete
- Installs up to 1 1/4" (3 cm) neat
-
ARDEX TL 2000™
Fiber Reinforced, Self-Leveling Underlayment
- Easy to mix and apply; high flow material
- No lath mesh or additives required over wood substrates
-
ARDEX AM 100™
Pre-Tile Ramping and Smoothing Mortar
- Install tile in just 2 hours
- No sag or slump
-
ARDEX Liquid BackerBoard®
Self-Leveling Underlayment for Interior Wood and Concrete Subfloors
- No metal lath mesh or additives required
- Walk on: 3 hours, Tile installation: 6 hours
-
ARDEX TL 1000™
Self-Leveling Underlayment
- Walk on in 4-5 hours
- Tile installation: 6 hours (most other floor coverings after 24 hours)
-
ARDEX K 60™ ARDITEX
Rapid Setting Latex Smoothing and Leveling Compound
- NEW PACKAGING OPTION!
- No water required for mixing; simply mix with latex additive
-
ARDEX FLEXBONE® HEAT Membrane
In-Floor Heating Systems, 3-in-1 Membrane
- 3-in-1 In Floor Heating, Uncoupling and Waterproofing
- Maximum heat efficiency, more heat comfort with less energy usage
-
ARDEX FLEXBONE® HEAT Cables
In-Floor Heating Systems
- Cold/Hot junction self-contained within the wire, no membrane cutting
- Cable width consistent in all sizes for a secure fit every time
-
ARDEX FLEXBONE® HEAT Thermostats
In-Floor Heating Systems
- Easy to use 3.5" touch displays
- Set-Up Wizard helps you through initial programming
-
ARDEX UI 720™ FLEXBONE®
Floating Uncoupling Membrane
- True 100% uncoupling
- Up to 50% time savings
-
ARDEX UI 740™ FLEXBONE®
Uncoupling Membrane
- PRODUCT ENHANCEMENT: Now with added ventilation channels!
- Prefill is just one pass
-
ARDEX DS 70™
Acoustic Mat
- Fast and easy installation with HENRY® 356C MultiPro™ Premium Multipurpose Carpet and Sheet Vinyl Adhesive
- Crack isolation up to 1/8" (3 mm)
-
ARDEX 8+9™
Rapid Waterproofing and Crack Isolation Compound
- Install tile in just 90 minutes and flood test in 4 hours
- Crack isolation up to 1/8" (3 mm)
-
ARDEX S 1-K™
One-Component Waterproofing and Crack Isolation Membrane
- Flexible, topside waterproofing for interior floors and walls
- Crack isolation up to 1/8" (3 mm)
-
ARDEX SK 175™
Waterproofing Membrane and Vapor Retarder for Tile & Stone Installations
- For topside waterproofing over floors and walls
- Perm rating acceptable for residential and commercial steam shower use
-
ARDEX SK MESH™
Reinforcement Fabric for Waterproofing and Crack Isolation
- For the reinforcement of ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and crack isolation
- Non-woven, polyester mesh reinforcement fabric
-
ARDEX SK DRAIN™
Mesh Reinforcement Fabric for Drain Tie-Ins
- For the reinforcement of ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound at drain tie-ins
- Non-woven, polyester mesh reinforcement fabric
-
ARDEX 8+9™
Rapid Waterproofing and Crack Isolation Compound
- Install tile in just 90 minutes and flood test in 4 hours
- Crack isolation up to 1/8" (3 mm)
-
ARDEX AM 100™
Pre-Tile Ramping and Smoothing Mortar
- Install tile in just 2 hours
- No sag or slump
-
ARDEX CA 20 P™
Multipurpose Construction Adhesive and Sealant
- Interior and exterior use
- Curing time: 24 hours
-
ARDEX X 5™
Flexible and Versatile Tile and Stone Mortar
- Ideal for large format and heavy tile and stone applications up to 3/4" sq. notch trowel
- Excellent sag resistance
-
ARDEX SX™
100% Silicone Sealant for Tile and Stone Applications
- Interior and exterior use
- No sag or slump
-
ARDEX X 77™ MICROTEC®
Fiber Reinforced Tile and Stone Mortar
- True 60-minute open time, unmatched sag resistance - Both double the ISO standard!
- Ideal for high traffic areas and exterior facades
-
ARDEX FH™
Sanded Floor and Wall Grout
- Open to traffic 16 to 24 hours
- For grout joints 1/16" to 3/4" (1.5 mm to 19 mm)
-
ARDEX X 32™ MICROTEC®
Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar
- Thin-to-thick bed applications up to 1 1/4" (32 mm)
- Fast setting; grout in 3 hours