fbpx

Toppings and Polished Concrete Systems

Products

ARDEX EP 2000™

Substrate Preparation Epoxy

  • Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
  • Required primer for decorative applications of ARDEX self-leveling toppings
  • Helps to minimize cracking in underlayments and toppings
ARDEX EP 2000
Images and Videos
  • ARDEX EP 2000

Information ARDEX EP 2000™

ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings.

Key Features

  • Two-component epoxy preparation material for the installation of ARDEX underlayments and toppings
  • Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
  • Required primer for decorative applications of ARDEX self-leveling toppings
  • Helps to minimize cracking in underlayments and toppings
  • Can be used as crack filling material
  • Can be used to provide secondary top-down waterproofing
  • Solvent-free, low viscosity, 100% solids epoxy resin
  • Receives sand broadcast
  • Use for interior and exterior substrates

 

Technical Data ARDEX EP 2000™

Installation

Mixing Ratio: Add entire pre-measured contents of Part B (Hardener) into Part A (Resin).
Coverage on CSP 3 Prepared Concrete: Approx. 150 to 200 sq. ft. (13.9 to 18.5 sq. m) per mixed unit of ARDEX EP 2000; (Will vary with surface profile)

Performance

Working Time: 30 minutes
Pot Life: 30 minutes; however, material should be poured onto the substrate and applied after mixing.
Walkable: 6 hours after sand broadcast
Install underlayment or topping: Min. 16 hours; no max. provided surface is protected
VOC: 0 g/L, calculated and reported, SCAQMD 1113
Packaging: One 10 lb. (4.5 kg) unit
Storage: Store in a cool dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Information ARDEX EP 2000™

ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings.

Key Features

  • Two-component epoxy preparation material for the installation of ARDEX underlayments and toppings
  • Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
  • Required primer for decorative applications of ARDEX self-leveling toppings
  • Helps to minimize cracking in underlayments and toppings
  • Can be used as crack filling material
  • Can be used to provide secondary top-down waterproofing
  • Solvent-free, low viscosity, 100% solids epoxy resin
  • Receives sand broadcast
  • Use for interior and exterior substrates

 

Technical Data ARDEX EP 2000™

Installation

Mixing Ratio: Add entire pre-measured contents of Part B (Hardener) into Part A (Resin).
Coverage on CSP 3 Prepared Concrete: Approx. 150 to 200 sq. ft. (13.9 to 18.5 sq. m) per mixed unit of ARDEX EP 2000; (Will vary with surface profile)

Performance

Working Time: 30 minutes
Pot Life: 30 minutes; however, material should be poured onto the substrate and applied after mixing.
Walkable: 6 hours after sand broadcast
Install underlayment or topping: Min. 16 hours; no max. provided surface is protected
VOC: 0 g/L, calculated and reported, SCAQMD 1113
Packaging: One 10 lb. (4.5 kg) unit
Storage: Store in a cool dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Case Studies: ARDEX EP 2000™

Case Studies

We are proud of our amazing case studies

ARDEX has been at the forefront of the tiling and flooring industries for over 50 years. ARDEX continue to offer unbeatable quality and cost effective solutions for building projects covering all sectors of business and commerce, such as retail outlets, leisure centres, health authorities, transport premises, art and educational institutions.

See all case studies