Patching and Repair
Products
ARDEX FP™ Form & Pour
Concrete Repair Mortar
- Formable, pourable and pumpable structural repair mortar
- Installs from 1/2” to 4” neat, and up to 8” with aggregate
- Apply coatings in as little as 72 hours after application
Information ARDEX FP™ Form & Pour
ARDEX FP™ Form & Pour is a formable, pourable, pumpable Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade.
Key Features
- Apply coatings in as little as 3 days
- Easy to apply
- Mixes with water only
- Installs from 1/2” – 4” (12.7 mm – 10.2 cm) neat and up to 8” (20.3 cm) when extended with aggregate
- Freeze-thaw resistant
- Suitable for normal service commercial, institutional and multi-unit residential applications
- Use for exterior and interior concrete repair
Technical Data ARDEX FP™ Form & Pour
Installation
Mixing Ratio: 5 – 6 pints (2.37 – 2.84 L) of water per 50 lb. (22.7 kg) bag
Coverage: 0.4 cu. ft. per 50 lb. bag (0.01 m3 per 22.7 kg bag); 9.6 sq. ft. per 50 lb. bag at 1/2” (0.890 sq. m per 22.7 kg bag at 12.7 mm)
Performance
Compressive Strength (ASTM C109): 1 day 2200 psi; 154.0 kg/sq. cm; 28 days 5500 psi; 385 kg/sq. cm
Flexural Strength (ASTM C78): 7 days 900 psi; 63 kg/sq. cm; 28 days 1050 psi; 73.5 kg/sq. cm
Modulus of Elasticity: 28 days 3.6 x 106 psi; 2.6 x 105 kg/sq. cm
Length Change (ASTM C157): 28 days 0.09%
Pot Life / Working Time: 20 – 40 minutes
Coat or Seal (Minimum): 3 days
Color: Gray
Packaging: 50 lb. (22.7 kg) Bag
Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
Shelf Life: 1 year, if unopened.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
For complete product technical information, click on the Downloads tab and open the Technical Data download.
Information ARDEX FP™ Form & Pour
ARDEX FP™ Form & Pour is a formable, pourable, pumpable Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade.
Key Features
- Apply coatings in as little as 3 days
- Easy to apply
- Mixes with water only
- Installs from 1/2” – 4” (12.7 mm – 10.2 cm) neat and up to 8” (20.3 cm) when extended with aggregate
- Freeze-thaw resistant
- Suitable for normal service commercial, institutional and multi-unit residential applications
- Use for exterior and interior concrete repair
Technical Data ARDEX FP™ Form & Pour
Installation
Mixing Ratio: 5 – 6 pints (2.37 – 2.84 L) of water per 50 lb. (22.7 kg) bag
Coverage: 0.4 cu. ft. per 50 lb. bag (0.01 m3 per 22.7 kg bag); 9.6 sq. ft. per 50 lb. bag at 1/2” (0.890 sq. m per 22.7 kg bag at 12.7 mm)
Performance
Compressive Strength (ASTM C109): 1 day 2200 psi; 154.0 kg/sq. cm; 28 days 5500 psi; 385 kg/sq. cm
Flexural Strength (ASTM C78): 7 days 900 psi; 63 kg/sq. cm; 28 days 1050 psi; 73.5 kg/sq. cm
Modulus of Elasticity: 28 days 3.6 x 106 psi; 2.6 x 105 kg/sq. cm
Length Change (ASTM C157): 28 days 0.09%
Pot Life / Working Time: 20 – 40 minutes
Coat or Seal (Minimum): 3 days
Color: Gray
Packaging: 50 lb. (22.7 kg) Bag
Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
Shelf Life: 1 year, if unopened.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
For complete product technical information, click on the Downloads tab and open the Technical Data download.