Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

 HENRY 452

General Purpose Epoxy Flooring Adhesive (Parts A & B)​​​

A general purpose, high-strength adhesive for installing many types of flooring where wet operating conditions or heavy static or rolling loads exist.
  • Short open time for quicker installation
  • Excellent bond integrity ensures long-term performance
  • Nonflammable
  • Moisture- and alkali-resistant


HENRY 452 General Purpose Epoxy Flooring Adhesive is a high-strength adhesive for installing a wide range of flooring types, including vinyl composition tile(VCT), felt-backed commercial sheet, linoleum, rubber tile, most recycled rubber, rubber and vinyl stair treads, and commercial homogeneous vinyl sheet where wet operating conditions or heavy static or rolling loads are present.

Bonds To:

HENRY 452 General Purpose Epoxy Flooring Adhesive bonds many types of flooring to suspended A.P.A.-approved wood, underlayment board, cementitious underlayment, and dry concrete at all grades where there is less than 3 lb./1000 sq. ft./24 hours as determined by the calcium chloride moisture test (ASTM-F-1869).  It also bonds well to existing resilient flooring, steel, stainless steel, aluminum, ceramic tile, terrazzo, marble, and polymeric poured floors.

Trowel Recommendations:

For all applications
1/32” D x 1/16” W x 5/64” A
225-275 sq. ft./gal.
(25-30 sq. yd./gal.)


The W.W. Henry Company warrants that HENRY 452 will not break down or lose its cohesive strength due to manufacturing or formulation defects for 1 year from the date of installation, subject to certain exclusions and limitations set forth in the warranty, if used for its stated purpose and applied in accordance with the stated instructions. 


Carefully read and follow all cautions and warnings on the product label.  Refer to the Material Safety Data Sheet for additional product information.  

Tech Support:  800.232.4832

 Technical Data Reference


 Safety Data Sheets