Skip Ribbon Commands
Skip to main content
Sign In


Self-Drying, Trowelable Concrete Underlayment

Fast setting patch for smoothing and repairing indoor concrete floors, ramps and stairways, as well as non-porous substrates such as terrazzo, ceramic and quarry tile, prior to the installation of floor covering.

View Product Sheet     English​     French     Spanish​​

Key Features

  • Formulated with a special blend of Portland cement, other hydraulic cements and polymers
  • Ideal for ramping, patching large areas and screeding
  • Fluid consistency for ease of application
  • Mixes with water only - no latex additive necessary
  • Exceptional bond strength


General Priming recommendations:

  • No priming is required over standard absorbent concrete.
  • Over non-porous substrates, use ARDEX P 82™ Ultra Prime.

Packaging: 40-lb. bag (18 kg)


  • 25 sq ft per bag at 1/4'' (2.3 sq m at 6 mm)
  • 50 sq ft per bag at 1/8’’ (4.6 sq m at 3 mm)
  • Coverage will vary depending on the texture of the surface being smoothed.


  • Install neat up to 1" (25.4 mm)
  • Up to 3" (7.6 cm) with aggregate


  • Most floor covering in as little as 90 minutes.
  • Wood flooring or high-performance adhesives, such as epoxies or urethanes after 16 hours



  • Initial Set: Approx. 30 minutes
  • Final Set: Approx.  90 minutes

ASTM C109/mod - Air Compressive Strength (Air cure only) - 4,200 psi (294.0 kg/cm2)

ASTM C348 Flexural Strength - 1,000 psi (70.0 kg/cm2)

VOC:    0



 Technical Data Reference




 Safety Data Sheets


 Product Videos


 Case Studies